☰ 🔍
🖊️Ask a Question
Electrical Engineering

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance

by 200 views
A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is
0 like 0 dislike

1 Answer

by

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

0 like 0 dislike

Related questions

by anonymous asked Mar 20, 2018 250 views
In a D.C. shunt motor, under the conditions of maximum power, the current in the armature will be?


Answer : In a D.C. shunt motor, under the conditions of maximum power, the current in the armature will be more than full-load current. ...

View solution
0 like 0 dislike
1 answer
by anonymous asked Mar 20, 2018 124 views
The armature torque of the D.C. shunt motor is proportional to?


Answer : The armature torque of the D.C. shunt motor is proportional to armature current. ...

View solution
0 like 0 dislike
1 answer
by anonymous asked May 8, 2018 86 views
A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2

A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is
Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87 ...

View solution
0 like 0 dislike
1 answer
by ansarulansari asked Jul 29, 2021 1 view
A 4-pole, dc shunt motor working on 250V takes a current of 2A when running at no load on 1000 rpm. Calculate its back emf and speed at load if the motor takes 51A. Armature and shunt field resistance are 0.2Ω and 250Ω respectively

A 4-pole, dc shunt motor working on 250V takes a current of 2A when running at no load on 1000 rpm. Calculate its back emf and speed at load if the motor takes 51A. Armature and shunt field resistance are 0.2Ω and 250Ω respectively

View solution
0 like 0 dislike
0 answers
by anonymous asked Apr 29, 2018 553 views
Aluminium is not used as winding wire for the armature of a dc machine because

Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper
Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper ...

View solution
0 like 0 dislike
1 answer

50.5k questions

47.1k answers

240 comments

7.0k users

© 2025 Question Answer