Describe the construction and working of two pass flow surface condenser also write it’s function and location in steam power plant.
1 Answer
Construction: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical perforated type plates in to which water tubes are fixed. This is done in such a manner that the leakage of water in to the center condensing space is prevented.
Working: The water tubes pass horizontally through the main condensing space for the steam. The steam enters at the top & is forced to flow downwards over the tubes due to the suction of the extraction pump at the bottom. The cooling water flows in one direction through lower half of the tubes & return in opposite direction through the upper half as shown in figure. The condensate does not mix with cooling water which is used for cooling steam & Convert into water; therefore whole condensate can be the reused in the boiler.
Function: It is used to increase the turbine output by maintaining backpressure on exhaust side of steam engine or turbine & the secondary function of condenser is to supply pure and hot feed water to boiler.
Location in steam power plant- between turbine and feed pump